Waterproof Automotive Connector Wire-to-Wire 12 Pin Male Connector For DT04-12PB-L012 Wire Plug socket

Product Description

DEUTSCH DT Receptacle connectors are female terminals. Available in 2, 3, 4-, 6-, 8, and 12-cavity designs, our DEUTSCH DT offers reliability and performance under harsh environments. Specifically, the DT04-12PB-L012 model is a highly specialized 12-pin housing for male terminals, engineered for critical wire-to-wire connections. This specific L012 modification features a molded flange, providing exceptional structural rigidity for firewall or direct panel mounting.

Designed for exacting interchangeability, this receptacle perfectly mates with the DT06-12S series plugs, ensuring a secure and exact fit within existing heavy-duty wiring harnesses. By utilizing industry-standard Size 16 contacts, it facilitates straightforward integration. Furthermore, this connector meets rigorous industrial and automotive testing standards, including RoHS, UL, and SAE compliance. When fully assembled with the appropriate silicone seals and wedgelocks, it achieves an impressive IP67/IP68 protection rating, effectively blocking out dust, moisture, and corrosive chemicals to maintain uninterrupted electrical conductivity in the most demanding field conditions.

Specification

Precision engineering is essential when integrating electrical components into heavy machinery and commercial vehicles. The following technical parameters detail the exact physical dimensions, thermal endurance, and structural design of this 12-pin receptacle. Every measurement, from the 9.12 mm centerline pitch to the precise panel mount specifications, is carefully calibrated to ensure accurate alignment and a tight seal during installation. These exact specifications guarantee that the connector will perform reliably across extreme temperature fluctuations and intense operational vibrations.

Key Features

Q: What are the DT connectors’ key features?

A: DT Connector Key Features provide exceptional utility and mechanical stability for demanding electrical architectures:

• Accepts contact size 16 (13 amps): Designed to handle consistent power distribution while accommodating 14-20 AWG wire sizes, offering excellent versatility for various electrical loads.
• 2, 3, 4, 6, 8, and 12 cavity arrangements: This specific model utilizes the comprehensive 12-cavity layout, perfect for consolidating multiple circuits into a single, organized connection point.
• In-line, flange, or PCB mount: The L012 modification specifically features a flange mount, allowing for highly secure panel or firewall installations. When paired with the correct cutout template, it prevents any movement during operation.
• Rectangular, thermoplastic housing: The geometric design maximizes space efficiency while the material resists mechanical stress, chemical exposure, and physical impact.
• Integrated latch for mating: Provides a distinct tactile and audible click when fully engaged, giving technicians immediate sensory confirmation of a secure, locked connection.
• Wedgelocks assure contact alignment and retention: These critical secondary locks snap into place to hold the pins firmly, ensuring they do not back out even under severe and continuous vibration.

Materials

Q: What material are DT connector shells made of?

A: DT connector shells are made of rugged glass filled PA (Polyamide). This industrial-grade thermoplastic is specifically chosen for its exceptional structural integrity. It actively protects the delicate internal circuits from physical impacts, abrasive debris, and extreme thermal fluctuations commonly encountered in engine compartments and heavy machinery environments.

Q: What are DT connector grommets made of?

A: DT connector grommets are made of silicone rubber. Positioned at the rear of the housing, this premium material conforms tightly around individual wire jackets. It creates a formidable, flexible barrier against moisture ingress, engine oils, and agricultural chemicals, ensuring long-term IP67/IP68 level protection.

Q: What material are DT connector wedgelocks made of?

A: DT connector wedgelocks are made of rugged glass filled PBT (Polybutylene Terephthalate). This highly rigid compound maintains strict dimensional stability under continuous mechanical stress, guaranteeing that all 12 pins remain perfectly aligned and securely seated within their respective cavities.

Q: What material are the DT connector receptacle interfacial seals made of?

A: The DT connector receptacle interfacial seals are made of silicone rubber. When mated with the corresponding plug, this raised seal compresses to eliminate any microscopic air gaps. This precise compression prevents moisture, dust, and salt spray from compromising the electrical contacts.

FAQ

Q: What is a DT connector?

A: DEUTSCH DT environmentally sealed connectors are designed for cable to cable, cable to board, and cable to device applications. DT connectors are used in harsh environment applications where even a small degradation in connection may be critical. They are engineered to deliver unwavering signal integrity, withstanding extreme temperature variations, direct moisture exposure, and the constant mechanical vibration generated by heavy engines and rough terrain.

Q: What are the appropriate applications for DT connectors?

A: These connectors are essential for demanding sectors including Truck, Bus, Off-highway equipment, Construction machinery, Agriculture tractors, Mining vehicles, Emergency Vehicles, Forestry equipment, Recreational Marine vessels, and Motorcycles. Their fully sealed design actively prevents mud, salt spray, and industrial fluids from interrupting vital electrical functions across these diverse fields.

Q: What accessories are required for a complete and secure installation?

A: To achieve maximum structural and electrical stability, this flange-mounted receptacle requires specific complementary components. Installers should utilize the appropriate 12-way secondary wedgelocks to lock the pins, a specialized flange gasket to seal the panel cutout, compatible size 16 solid or stamped terminals, and the designated terminal removal tool (such as the 0411-310-1605) for safe, damage-free maintenance.

Q: Are there scalable supply options for large-scale manufacturing?

A: Yes, to support extensive production lines and complex supply chains, these connectors and their associated components can be supplied in optimized formats. Options include terminals delivered on continuous reels for automated crimping machines, pre-assembled wire pigtails tailored to specific length requirements, and structured volume scheduling to align with strict manufacturing timelines and reduce procurement friction.