close
Choose Your Site
Global
Social Media
 |
This automotive electronic wiring harness kit integrates a waterproof fuse holder, designed to transmit electrical signals stably and protect circuits from overloads in automotive and industrial environments. It supports overload protection for currents ranging from 5A to 30A, combining reliable power transmission with circuit safety protection—effectively preventing component burnout caused by current surges. As a result, it becomes an essential component for the stable operation of electronic systems in both on-vehicle and industrial settings.
| Quantity: | |
|---|---|
Electronic Wiring Harness 14
Product name | waterproof fuse holder wire harness kits |
Test | 100 Testing |
Cable materials | pure copper |
Cable color, lenght | According to the customers' need |
Insulation | Rubber,Silicon,PE,...etc |
Connector Type | Molex, JST, TE, Deutsch |
Application | Automotive,Electrical,Industry |
Service | OEM and ODM are acceptable |
Samples | Provide samples for confirmation before production |
Certificates | ITAF16949, ISO9001 |
Widely applicable to automotive electronics (such as LED car lighting systems, high-power audio equipment, on-board charging modules for new energy vehicles, and OBD diagnostic interfaces), household electrical equipment (like portable generators and outdoor power supplies), and industrial control devices (including PLC control cabinets and sensor signal transmitters). It performs exceptionally well in scenarios requiring waterproof and dustproof protection, as well as resistance to harsh conditions such as extreme temperatures and mechanical vibration.
In off-road vehicles frequently exposed to muddy roads or daily commuting cars facing rainy seasons, the wiring harness is often in contact with rainwater, road dust, and continuous road vibrations. With an IP67+ waterproof grade (able to withstand 24-hour immersion in 1m-deep water without water ingress) and vibration resistance (adapting to 10-2000Hz vibration frequencies), it prevents short circuits caused by moisture and dust accumulation. Even in extreme weather like -40℃ cold snaps or 125℃ high-temperature engine compartments, it ensures the stable operation of on-board electronics such as navigation systems and air conditioning controllers.
For industrial control cabinets installed in factory workshops and outdoor electrical equipment like street lamp control boxes, the kit’s oil resistance (resisting mineral oil immersion for 72 hours) and high-temperature resistance (operating normally at 150℃ for short periods) adapt to harsh industrial environments. It avoids circuit failures due to oil contamination from mechanical equipment or temperature fluctuations caused by day-night differences. The built-in fuse holder can quickly cut off the circuit within 0.1 seconds when overloaded, effectively protecting valuable equipment such as frequency converters and servo motors from damage.
In household or commercial electrical appliances requiring mobile use (e.g., outdoor projectors and portable welding machines), the customizable cable length (ranging from 0.5m to 10m) and flexible installation methods (supporting fixed or hanging installation) meet diverse layout needs. The anti-UV insulation material (compliant with ASTM G154 UV resistance standards) prevents aging and cracking under long-term sunlight exposure, extending the service life of the equipment by more than 3 years compared to ordinary wiring harnesses.
Superior Environmental Adaptability: Withstands harsh conditions such as strong electromagnetic interference (complying with EMC EN 55022 standards), UV radiation (ASTM G154), vibration (10-2000Hz), high/low temperatures (-40℃ to 125℃), and oil pollution (resisting mineral oil and hydraulic oil), suitable for complex working environments in automotive, industrial, and outdoor fields.
Reliable Waterproof & Dustproof Performance: IP67+ waterproof grade and detachable silicone protective cap design effectively isolate moisture and dust; undergoes 1m depth, 24-hour immersion testing without water ingress, safeguarding internal circuits from environmental erosion.
Eco-Friendly & Energy-Saving: Adopts RoHS 2.0 and REACH-compliant environmental protection materials, reducing harmful substance emissions (e.g., lead, mercury) by over 95%; low-resistance pure copper conductors reduce energy loss by 15% compared to ordinary copper-clad aluminum conductors.
Strict Quality Control: Undergoes 100% full inspection before shipment, including tests for wire crimp strength (≥50N), insulation resistance (≥100MΩ), and contact resistance (≤10mΩ), ensuring each product meets high-quality standards.
The cable is made of 99.9% high-purity oxygen-free copper, featuring excellent electrical conductivity (resistivity ≤0.0172Ω·mm²/m) and low resistance to ensure efficient power transmission. Insulation materials include high-temperature resistant rubber (for engine compartments), food-grade silicon (for equipment in contact with human bodies), and flame-retardant PE (for indoor electrical equipment), all providing good insulation (breakdown voltage ≥20kV/mm) and wear resistance (abrasion resistance ≥500 cycles).
Compatible with well-known connector brands such as Molex (Mini-Fit Jr. series), JST (PH series), TE (AMP Superseal series), and Deutsch (DT series), ensuring strong compatibility. Supports crimping and soldering connection methods; crimped connections have a pull-out force of ≥30N, and soldered connections have a solder joint strength of ≥25N, ensuring stable connection with various equipment.
Single package size is 20X15X10 cm, net weight 0.100 kg, compact and lightweight for easy transportation and installation. The cable model complies with UL 1015 10AWG standards, with a cross-sectional area of 5.31mm² (tolerance ±0.02mm²) and a maximum current-carrying capacity of 55A at 25℃. The fuse holder supports 5A-30A blade fuses (ATO/ATC type) and has a rated voltage of 32V DC.
Certified by IATF16949 (automotive industry), ISO9001 (quality management), CE (European market), and UL (North American market), meeting international quality management system requirements. Each product undergoes 100% strict testing before leaving the factory, including waterproof testing, high-temperature aging testing (125℃ for 1000 hours), and vibration testing (10-2000Hz for 24 hours), to ensure performance stability.
Provides full OEM/ODM services, customizing product structures (e.g., integrated or split fuse holders), fuse holder types (blade, glass tube, or ceramic fuses), and cable configurations (single-core or multi-core) according to customer drawings (2D/3D), samples, or technical requirements. The typical design cycle is 7-15 working days, and 3D simulation tests are provided to verify product feasibility.
Supports small batch orders (minimum 10 units) to meet personalized needs of customers for special scenarios (e.g., customized wiring harnesses for vintage car modifications), without minimum order quantity restrictions. For orders of 10-50 units, the delivery cycle is 5-10 working days; for orders exceeding 50 units, bulk production discounts are available.
Cable color (over 20 standard colors, including black, red, blue, and yellow) and length (0.5m-10m, with 0.1m increments) can be customized according to actual application needs, matching different equipment layouts (e.g., compact engine compartments or large industrial workshops) and installation environments (indoor/outdoor).
Offers engineering and technical support for connector and cable assembly structure design, mold manufacturing (for custom fuse holders), and EMC performance optimization, assisting customers in solving technical problems during development. Provides 24/7 online technical consultation and on-site technical guidance for key projects.
Provides free samples (1-3 units) for customer confirmation before mass production, including performance testing (waterproof, current-carrying) and appearance inspection. The sample production cycle is 3-5 working days; if modifications are needed, revised samples are provided free of charge until the product meets expectations in terms of performance and appearance.
Product name | waterproof fuse holder wire harness kits |
Test | 100 Testing |
Cable materials | pure copper |
Cable color, lenght | According to the customers' need |
Insulation | Rubber,Silicon,PE,...etc |
Connector Type | Molex, JST, TE, Deutsch |
Application | Automotive,Electrical,Industry |
Service | OEM and ODM are acceptable |
Samples | Provide samples for confirmation before production |
Certificates | ITAF16949, ISO9001 |
Widely applicable to automotive electronics (such as LED car lighting systems, high-power audio equipment, on-board charging modules for new energy vehicles, and OBD diagnostic interfaces), household electrical equipment (like portable generators and outdoor power supplies), and industrial control devices (including PLC control cabinets and sensor signal transmitters). It performs exceptionally well in scenarios requiring waterproof and dustproof protection, as well as resistance to harsh conditions such as extreme temperatures and mechanical vibration.
In off-road vehicles frequently exposed to muddy roads or daily commuting cars facing rainy seasons, the wiring harness is often in contact with rainwater, road dust, and continuous road vibrations. With an IP67+ waterproof grade (able to withstand 24-hour immersion in 1m-deep water without water ingress) and vibration resistance (adapting to 10-2000Hz vibration frequencies), it prevents short circuits caused by moisture and dust accumulation. Even in extreme weather like -40℃ cold snaps or 125℃ high-temperature engine compartments, it ensures the stable operation of on-board electronics such as navigation systems and air conditioning controllers.
For industrial control cabinets installed in factory workshops and outdoor electrical equipment like street lamp control boxes, the kit’s oil resistance (resisting mineral oil immersion for 72 hours) and high-temperature resistance (operating normally at 150℃ for short periods) adapt to harsh industrial environments. It avoids circuit failures due to oil contamination from mechanical equipment or temperature fluctuations caused by day-night differences. The built-in fuse holder can quickly cut off the circuit within 0.1 seconds when overloaded, effectively protecting valuable equipment such as frequency converters and servo motors from damage.
In household or commercial electrical appliances requiring mobile use (e.g., outdoor projectors and portable welding machines), the customizable cable length (ranging from 0.5m to 10m) and flexible installation methods (supporting fixed or hanging installation) meet diverse layout needs. The anti-UV insulation material (compliant with ASTM G154 UV resistance standards) prevents aging and cracking under long-term sunlight exposure, extending the service life of the equipment by more than 3 years compared to ordinary wiring harnesses.
Superior Environmental Adaptability: Withstands harsh conditions such as strong electromagnetic interference (complying with EMC EN 55022 standards), UV radiation (ASTM G154), vibration (10-2000Hz), high/low temperatures (-40℃ to 125℃), and oil pollution (resisting mineral oil and hydraulic oil), suitable for complex working environments in automotive, industrial, and outdoor fields.
Reliable Waterproof & Dustproof Performance: IP67+ waterproof grade and detachable silicone protective cap design effectively isolate moisture and dust; undergoes 1m depth, 24-hour immersion testing without water ingress, safeguarding internal circuits from environmental erosion.
Eco-Friendly & Energy-Saving: Adopts RoHS 2.0 and REACH-compliant environmental protection materials, reducing harmful substance emissions (e.g., lead, mercury) by over 95%; low-resistance pure copper conductors reduce energy loss by 15% compared to ordinary copper-clad aluminum conductors.
Strict Quality Control: Undergoes 100% full inspection before shipment, including tests for wire crimp strength (≥50N), insulation resistance (≥100MΩ), and contact resistance (≤10mΩ), ensuring each product meets high-quality standards.
The cable is made of 99.9% high-purity oxygen-free copper, featuring excellent electrical conductivity (resistivity ≤0.0172Ω·mm²/m) and low resistance to ensure efficient power transmission. Insulation materials include high-temperature resistant rubber (for engine compartments), food-grade silicon (for equipment in contact with human bodies), and flame-retardant PE (for indoor electrical equipment), all providing good insulation (breakdown voltage ≥20kV/mm) and wear resistance (abrasion resistance ≥500 cycles).
Compatible with well-known connector brands such as Molex (Mini-Fit Jr. series), JST (PH series), TE (AMP Superseal series), and Deutsch (DT series), ensuring strong compatibility. Supports crimping and soldering connection methods; crimped connections have a pull-out force of ≥30N, and soldered connections have a solder joint strength of ≥25N, ensuring stable connection with various equipment.
Single package size is 20X15X10 cm, net weight 0.100 kg, compact and lightweight for easy transportation and installation. The cable model complies with UL 1015 10AWG standards, with a cross-sectional area of 5.31mm² (tolerance ±0.02mm²) and a maximum current-carrying capacity of 55A at 25℃. The fuse holder supports 5A-30A blade fuses (ATO/ATC type) and has a rated voltage of 32V DC.
Certified by IATF16949 (automotive industry), ISO9001 (quality management), CE (European market), and UL (North American market), meeting international quality management system requirements. Each product undergoes 100% strict testing before leaving the factory, including waterproof testing, high-temperature aging testing (125℃ for 1000 hours), and vibration testing (10-2000Hz for 24 hours), to ensure performance stability.
Provides full OEM/ODM services, customizing product structures (e.g., integrated or split fuse holders), fuse holder types (blade, glass tube, or ceramic fuses), and cable configurations (single-core or multi-core) according to customer drawings (2D/3D), samples, or technical requirements. The typical design cycle is 7-15 working days, and 3D simulation tests are provided to verify product feasibility.
Supports small batch orders (minimum 10 units) to meet personalized needs of customers for special scenarios (e.g., customized wiring harnesses for vintage car modifications), without minimum order quantity restrictions. For orders of 10-50 units, the delivery cycle is 5-10 working days; for orders exceeding 50 units, bulk production discounts are available.
Cable color (over 20 standard colors, including black, red, blue, and yellow) and length (0.5m-10m, with 0.1m increments) can be customized according to actual application needs, matching different equipment layouts (e.g., compact engine compartments or large industrial workshops) and installation environments (indoor/outdoor).
Offers engineering and technical support for connector and cable assembly structure design, mold manufacturing (for custom fuse holders), and EMC performance optimization, assisting customers in solving technical problems during development. Provides 24/7 online technical consultation and on-site technical guidance for key projects.
Provides free samples (1-3 units) for customer confirmation before mass production, including performance testing (waterproof, current-carrying) and appearance inspection. The sample production cycle is 3-5 working days; if modifications are needed, revised samples are provided free of charge until the product meets expectations in terms of performance and appearance.
